Showing 85–96 of 99 resultsSorted by price: low to high
CornerStone® ANSI 107 Class 3 Soft Shell Jacket
$72.98- 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining
- Black bottom front and lower sleeves for a cleaner appearance
- Fabric waterproof rating: 5000MM
- Fabric breathability rating: 5000G/M²
- Full-length interior storm flap with chin guard
- Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
- Molded right chest, hand and center front zippers with rubber pulls
- Mic clips at shoulders
- Elastic cuffs with adjustable hook and loop closures and rubber tabs
- Adjustable drawcord hem
- This garment must be fully zipped to be in compliance with ANSI 107 standards
Premium Surveyors Vest Orange/Black
$74.89-
- Phone pocket
- 2 lower pocket flagging tape grommets
- 2 lapel grommets
- 2 side pockets for secure storage of spray paint
- Back pouch with left and right zip access
- Front zip opening reinforced with high quality webbing tape for ultimate durability
- Solid polyester front for durability and mesh back for increased breathability
- Pen pocket
- Internal tablet pocket for safe storage
- Padded collar for added comfort
- 11 pockets for ample storage
- Radio loops for easy clipping of a radio
- Two tone heat applied segmented reflective tape for added visibility
Hi-Vis Surveyor’s Vest
$89.95Opening in the back for safety harness, Mesh fabric in front yoke and all back
Zipper on the right side for opening pocket at the back
V neck
Padding in the neck
Double zippers at the front for adjustable width
Back pocket, all back opening with zip in right side
Loose-hanging chest pockets with safety straps and button closure, one with telephone pocket and one with pen pocket
Inside iPad-pocket, Radio loop, Grommets in lower front pockets 2 in each, Lower front pockets with bellow 2 in 1 with flap attached with velcro, Right bottle pocket, adjuster with velcro
50 mm wide reflective tape, Reflective tape on shoulders and body
CSA Surveyor’s Vest
$89.95CSA Z96 Class 2
Padding in the neck
Normal fit
Chest pocket with telephone pocket and pen pocket, Chest pockets loose hanging with safety strap with push buttons, one with phone pocket and one with pen pockets
Bellowed front pockets, Front pockets with bellows and flap
50 mm wide reflective tape
Women’s Ripstop Pant
$89.9960% cotton, 40% polyester, ripstop 7 oz
Stretch panels
Pre-bent knees
Plastic zipper fly
Loops, one with D ring
Inside leg seam with double stitching
Blåkläder embroidery back
Ripstop Pants
$94.3160% cotton, 40% polyester, ripstop 7 oz
Plastic zipper fly
Loops, one with D ring
Inside leg seam with double stitching
Blåkläder embroidery back
Back pockets with bellow, reinforced
Reflective details
Mercer+Mettle® Women’s Puffy Parka
$99.98Professional and polished while protecting from the elements, this lofty, high-performing puffy is intentionally designed to lend dependable warmth and transitional style for downtown or out-of-town. The DWR finish sheds moisture while the blown-in synthetic insulation gives the soft, lightweight and pliable effect of down with easy washability.
Fabric+Weight
- 100% polyester
- 5K/3K waterproof breathable fabric
- 12.7-ounce, 100% polyester blown insulation
Features+Benefits
- Quilted 3-piece hood
- Reverse coil, 2-way front zipper
- Interior storm flap
- Exterior storm flap with hidden snap closure
- Interior right-side pocket
- Hidden, zippered hand pockets
- Elastic at inner cuffs
- Decoration access pocket
Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction
$109.95Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.
Carhartt® Short Firm Duck Insulated Bib Overalls
$110.00- 12-ounce, firm hand, 100% ring spun cotton duck canvas
- Quilted nylon lining to waist for easy on and off; 100% polyester insulation to waist for midweight warmth
- Adjustable elastic suspenders for a personalized fit
- Multi-compartment bib pocket with zip closure
- Zipper fly
- Two large front pockets
- Hammer loop on right leg
- Seam-to-seam chap-style double-front construction
- Double-layer knees with openings for added knee pads and cleaning out debris
- Ankle-to-thigh leg zippers with storm flaps and snap closures
- Reinforced Cordura® back-leg kick panels
- Two reinforced back pockets
- Metal rivets at vital stress points
- Carhartt-strong, triple-stitched main seams
- Carhartt label sewn on bib pocket
- 29-inch inseam
- Loose fit
Rain Pants with Reflective Details
$120.24100% polyester, polyurethane coated, wind and waterproof, 7 oz
Wind and waterproof with welded seams
Reinforced on knees and the lower back of trouser leg
Adjustable with drawstring at waist and wide elastic on back
Adjustable and removable braces with elastic
Leg pocket with bellow and flap
Ruler pocket with extra pocket
Adjustable leg bottom with buttons
Reflective detail on legs
Elite Safety Shoe – Vented
$152.87Features:
– ASTM F2413-18 Puncture Resistant
– Composite toe cap
– Electrical Hazard Protection
– Slip Resistant Outsole
– Waterproof membrane
– Freelock quick lace system
– Injection molded mid-sole
Storm 6″ Safety Boot
$224.89Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole