$224.89

Storm 6″ Safety Boot

Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole

  Clear selection
Compare
SKU: 226000007899 Category:
Description

Description

The Storm 6″ Safety boot is built for high performance and comfort in extreme cold. The boot is made of premium full-grain leather with TPU reinforcements on the toe and heel along with a thick wool/poly lining inside for added comfort and warmth.  It also features a Composite toe cap, small nail penetration protection, a full nylon shank, and a cold isolation membrane inside the insole along with 200g ThinsulateTM insulation. The full waterproof membrane also ensures that the waterproof feature will never wear off or wash out.

The Storm collection is designed with our Nitrile/PU outsoles to provide added grip in extreme conditions including, cold, heat and chemical exposure. The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. This is an ideal shoe for outdoor work in mild to cold conditions.

 

Additional information

Additional information

Size

10-10.5, 11-11.5, 12, 13, 14, 15, 6-6.5, 7-7.5, 8-8.5, 9-9.5

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products

Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction

$109.95

Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.

Premium Surveyors Vest Orange/Black

$74.89
    • Phone pocket
    • 2 lower pocket flagging tape grommets
    • 2 lapel grommets
    • 2 side pockets for secure storage of spray paint
    • Back pouch with left and right zip access
    • Front zip opening reinforced with high quality webbing tape for ultimate durability
    • Solid polyester front for durability and mesh back for increased breathability
    • Pen pocket
    • Internal tablet pocket for safe storage
    • Padded collar for added comfort
    • 11 pockets for ample storage
    • Radio loops for easy clipping of a radio
    • Two tone heat applied segmented reflective tape for added visibility

Jerzees® – Dri-Power® 50/50 Cotton/Poly T-Shirt

$5.20$7.20
  • 5.4-ounce, 50/50 cotton/poly
  • 47/53 cotton/poly (Oxford)
  • Advanced moisture management performance
  • Tear-away label
  • Seamless 1×1 rib knit crew collar
  • Double-needle coverstitching on front neck
  • Shoulder-to-shoulder taping
  • Double-needle sleeves and hem
  • Ash (formerly Birch)

CornerStone® ANSI 107 Class 3 Mesh Tee

$23.00
This breathable, moisture-wicking mesh tee delivers the highest ANSI visibility with additional reflective tape to meet ANSI 107 Class 3 standards.
  • 4.1-ounce, 100% polyester birdseye mesh
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • 1×1 rib knit neck
  • Back neck tape
  • Left chest pocket

Elite 6″ Freelock Boot

$224.89

Features:
– ASTM F2413-18 Puncture Resistant
– Composite toe cap
– Electrical Hazard Protection
– Slip Resistant Outsole
– Waterproof membrane
– Freelock quick lace system
– Injection molded mid-sole

CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest

$22.12
  • 100% polyester mesh for breathability
  • 100% polyester tricot exterior pockets for durability and easy decoration
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
  • Left chest bellows pocket with flap and hook and loop closure
  • Two layered right chest pockets: one open, one divided
  • Two lower front flap pockets with hook and loop closures
  • Interior open lower mesh pockets on both sides
  • Mic clip at left chest for easy access
  • Molded center front zippered closure
  • This garment must be fully zipped to be in compliance with ANSI 107 standards