$72.98

CornerStoneĀ® ANSI 107 Class 3 Soft Shell Jacket

This warm performance soft shell combines superior weather protection with the highest class of visibility.
  • 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining
  • Black bottom front and lower sleeves for a cleaner appearance
  • Fabric waterproof rating: 5000MM
  • Fabric breathability rating: 5000G/M²
  • Full-length interior storm flap with chin guard
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
  • Molded right chest, hand and center front zippers with rubber pulls
  • Mic clips at shoulders
  • Elastic cuffs with adjustable hook and loop closures and rubber tabs
  • Adjustable drawcord hem
  • This garment must be fully zipped to be in compliance with ANSI 107 standards
  Clear selection
Compare
SKU: CSJ503 Category:
Additional information

Additional information

Color

Black, White, Royal, Navy, Safety Green, Safety Orage, Acuatic Blue

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products

GildanĀ® – Youth Heavy Blendā„¢ Hooded Sweatshirt

$24.00
  • 8-ounce, 50/50 cotton/poly
  • Double-needle stitching at waistband and cuffs
  • Double-lined hood
  • No drawcord at hood
  • 1×1 rib knit cuffs and waistband with spandex
  • Front pouch pocket
  • Recycled, high-performing black tear-away label

Please note: This product is transitioning from tear-away labels to recycled, high-performing black tear-away labels. Your order may contain a combination of both labels

CornerStoneĀ® ANSI 107 Class 2 Mesh Back Safety Vest

$22.12
  • 100% polyester mesh for breathability
  • 100% polyester tricot exterior pockets for durability and easy decoration
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
  • Left chest bellows pocket with flap and hook and loop closure
  • Two layered right chest pockets: one open, one divided
  • Two lower front flap pockets with hook and loop closures
  • Interior open lower mesh pockets on both sides
  • Mic clip at left chest for easy access
  • Molded center front zippered closure
  • This garment must be fully zipped to be in compliance with ANSI 107 standards

Infant Core Fleece Full-Zip

$7.20

Our popular 7.8-ounce hooded sweatshirt designed for the smallest family members. Color-coordinated with our adult PC78, 7.8-ounce Core Fleece Sweatshirts.

  • 7.8-ounce, 50/50 cotton/poly fleece
  • Air jet yarn for softness
  • Jersey-lined hood
  • Satin label
  • No drawcord
  • YKK metal zipper
  • Side seamed
  • Set-in sleeves
  • Coverseamed arm seams, cuffs and waistband
  • Rib knit cuffs and waistband
  • Front pouch pockets

District Ā® Featherweight French Terry ā„¢ Hoodie

$22.28

A laid-back vibe captured in a soft hoodie.

  • 4.5-ounce, 70/30 combed ring spun cotton/poly French terry, 40 singles
  • Tear-away label
  • Back neck tape
  • Unlined hood
  • Front pouch pocket
  • Dyed-to-match drawcords with metal tips and grommets

Port AuthorityĀ® Enhanced Visibility Cap

$9.00

This cap has reflective taping in the sandwich, top of bill, back crown and closure.Ā Features a moisture-wicking CoolMaxĀ® sweatband.

  • Fabric: 100% fluorescent polyester
  • Structure: Lightly structured
  • Profile: Low
  • Closure: Hook and loop

Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction

$109.95

Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.