Additional information
| Color | Black, White, Royal, Navy, Safety Green, Safety Orage, Acuatic Blue |
|---|
New
$72.98
CornerStoneĀ® ANSI 107 Class 3 Soft Shell Jacket
This warm performance soft shell combines superior weather protection with the highest class of visibility.
- 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining
- Black bottom front and lower sleeves for a cleaner appearance
- Fabric waterproof rating: 5000MM
- Fabric breathability rating: 5000G/MĀ²
- Full-length interior storm flap with chin guard
- Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
- Molded right chest, hand and center front zippers with rubber pulls
- Mic clips at shoulders
- Elastic cuffs with adjustable hook and loop closures and rubber tabs
- Adjustable drawcord hem
- This garment must be fully zipped to be in compliance with ANSI 107 standards
Additional information
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
More Products
CornerStoneĀ® ANSI 107 Class 3 Mesh Tee
$23.00This breathable, moisture-wicking mesh tee delivers the highest ANSI visibility with additional reflective tape to meet ANSI 107 Class 3 standards.
- 4.1-ounce, 100% polyester birdseye mesh
- Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
- 1×1 rib knit neck
- Back neck tape
- Left chest pocket
Storm 6″ Safety Boot
$224.89Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole
Port AuthorityĀ® Sueded Cap
$49.90Get the sophisticated look of a sueded cap. A CoolMaxĀ®Ā sweatband adds moisture-wicking performance.
- Fabric: 68/32 nylon/poly
- Structure: Lightly structured
- Profile: Low
- Closure: Self-fabric slide closure
Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction
$109.95Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.
District Ā® Perfect Tri Ā® Long Sleeve Hoodie
$14.00A lightweight tri-blend essential thatās perfect all year round.
- 4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
- Tear-away label
- Shoulder to shoulder taping
District Ā® Featherweight French Terry ā¢ Hoodie
$22.00A laid-back vibe captured in a soft hoodie.
- 4.5-ounce, 70/30 combed ring spun cotton/poly French terry, 40 singles
- Tear-away label
- Back neck tape
- Unlined hood
- Front pouch pocket
- Dyed-to-match drawcords with metal tips and grommets
Related Products
- 7.8-ounce, 50/50 cotton/poly fleece
- Air jet yarn for softness
- Two-ply hood
- Dyed-to-match drawcords
- YKK metal zipper
- Front pockets
- 7.8-ounce, 50/50 cotton/poly fleece
- Air jet yarn for softness
- 8-ounce, 50/50 cotton/poly
- Double-needle stitching at waistband and cuffs
- Double-lined hood
- No drawcord at hood
- 1×1 rib knit cuffs and waistband with spandex
- Front pouch pocket
- Recycled, high-performing black tear-away label
- 5.5-ounce, 100% polyester smooth-faced fleece
- Moisture-wicking
- Black bottom front and lower sleeves for a cleaner appearance
- Three-panel hood with drawcord adjustable closure
- Taped neck
- Front pouch pocket
- Rib knit cuffs and hem
- Non-ANSI
- 8-ounce, 50/50 cotton/poly NuBlendĀ® pill-resistant fleece
- High stitch density for a smooth printing canvas
- Two-ply hood with grommets and dyed-to-match tipped and knotted drawcord
- 1×1 rib knit in cuffs and waistband
- Front pouch pocket
- Double-needle coverseamed neck, armholes and waistband
- Ash (formerly Birch)
Port & CompanyĀ® Core Fleece Full-Zip Hooded Sweatshirt
$28.00A versatile full-zip hooded sweatshirt in our core weight.
Looking for a youth companion style for the PC78ZH? See the PC90YZH for the same 7.8-ounce Core Fleece and kid-friendly styling.
Port CompanyĀ® Core Fleece Pullover Hooded Sweatshirt
$7.20Cozy sweats in our core weight.
Looking for a youth companion style for the PC78H? See the PC90YH for the same 7.8-ounce Core Fleece and kid-friendly styling.
GildanĀ® – Youth Heavy Blendā¢ Hooded Sweatshirt
$24.00Please note: This product is transitioning from tear-away labels to recycled, high-performing black tear-away labels. Your order may contain a combination of both labels
CornerStoneĀ® Enhanced Visibility Fleece Pullover Hoodie
$42.20Enhanced visibility joins moisture-wicking performance in this layerable worksite basic.
JerzeesĀ® – NuBlendĀ® Pullover Hooded Sweatshirt
Price range: $5.38 through $24.30Please note: This product is transitioning from sewn-in labels to sewn-in, tear-away labels. Your order may contain a combination of both labels.
JerzeesĀ® – Dri-PowerĀ® 50/50 Cotton/Poly Long Sleeve T-Shirt
$7.205.4-ounce, 50/50 cotton/poly jersey
47/53 cotton/poly (Oxford)
Moisture-wicking
Tear-away label
Double-needle coverstitching on front neck
Seamless 1×1 rib knit collar
Shoulder-to-shoulder taping
Rib knit cuffs
Double-needle hem
Ash (formerly Birch)
Reviews
There are no reviews yet.