New
Click to enlarge
Prev
DAX Full Brim Hard Hat
DAX Full Brim Hard Hat
$235.92
Go to Shop
Next
Storm 6" Freelock Boot
Storm 6" Freelock Boot
$246.31

$224.89

Storm 6″ Safety Boot

Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole

  Clear selection
Add to wishlist Add to wishlist
Compare
Compare
SKU: 226000007899 Category:
Description

Description

The Storm 6″ Safety boot is built for high performance and comfort in extreme cold. The boot is made of premium full-grain leather with TPU reinforcements on the toe and heel along with a thick wool/poly lining inside for added comfort and warmth.  It also features a Composite toe cap, small nail penetration protection, a full nylon shank, and a cold isolation membrane inside the insole along with 200g ThinsulateTM insulation. The full waterproof membrane also ensures that the waterproof feature will never wear off or wash out.

The Storm collection is designed with our Nitrile/PU outsoles to provide added grip in extreme conditions including, cold, heat and chemical exposure. The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. This is an ideal shoe for outdoor work in mild to cold conditions.

 

Additional information

Additional information

Size

10-10.5, 11-11.5, 12, 13, 14, 15, 6-6.5, 7-7.5, 8-8.5, 9-9.5
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products
New
Portwest US392 Women's Hi Vis Safety Work Vest with Reflective Tape Yellow
Add to wishlist Add to wishlist
Compare
Select options
Quick view

Portwest US392 Women’s Hi Vis Safety Work Vest with Reflective Tape Yellow

 $19.99
  • Radio loop for easy clipping of a radio
  • Front zip opening for easy access
  • Phone and pen holder pocket
  • This product does not comply with ANSI/ISEA 107-2015
Select options
Add to wishlist Add to wishlist
New
CornerStone® ANSI 107 Class 3 Surveyor Mesh Zippered Two-Tone Short Sleeve Vest
Add to wishlist Add to wishlist
Compare
Select options
Quick view

CornerStone® ANSI 107 Class 3 Surveyor Mesh Zippered Two-Tone Short Sleeve Vest

 $30.00
  • 100% polyester mesh for breathability
  • 100% polyester tricot exterior pockets for durability and easy decoration
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
  • Left chest bellows pocket with flap and hook and loop closure
  • Two layered right chest pockets: one open, one divided
  • Two lower front flap pockets with hook and loop closures
  • Interior open lower mesh pockets on both sides
  • Mic clip at left chest for easy access
  • Molded center front zippered closure
  • This garment must be fully zipped to be in compliance with ANSI 107 standards
Select options
Add to wishlist Add to wishlist
New
New Era ® Standard Fit Snapback Trucker Cap
Add to wishlist Add to wishlist
Compare
Select options
Quick view

New Era ® Standard Fit Snapback Trucker Cap

 $14.00
This reinvented trucker is on-trend with its structured, high-profile look.
  • 100% cotton twill front panels and bill, 100% polyester mesh mid and back panels
  • Structured
  • High-profile
  • 7-position adjustable snap closure
  • 9FIFTY FIT: Features a classic, throwback look with a flat visor that can curve with a full crown. Includes a structured front panel for stability and an open back with snapback closure.
The purchase of branded and private label products are subject to certain guidelines. For more information about these requirements, see our branded and private label sales policies.
Select options
Add to wishlist Add to wishlist
New
Gildan® Softstyle® Crewneck Sweatshirt
Add to wishlist Add to wishlist
Compare
Select options
Quick view

Gildan® Softstyle® Crewneck Sweatshirt

 $5.38
  • 8.4-ounce, 80/20 ring spun cotton/poly
  • 75/25 ring spun cotton/poly (Sport Grey)
  • 50/50 ring spun cotton/poly (Dark Heather)
  • Two-end ring spun cotton face fabric
  • 1×1 rib knit with spandex cuffs and bottom band
  • Dropped shoulder
  • Double-needle topstitching throughout
  • Tubular body
  • Classic fit
  • Recycled, high-performing black tear-away label

Please note: This product is transitioning from tear-away labels to recycled, high-performing black tear-away labels. Your order may contain a combination of both labels.

 

Select options
Add to wishlist Add to wishlist
New
Carhartt® Midweight 1/4-Zip Mock Neck Sweatshirt
Add to wishlist Add to wishlist
Compare
Select options
Quick view

Carhartt® Midweight 1/4-Zip Mock Neck Sweatshirt

 $49.90

From job sites to weekend errands, this layerable 1/4-zip offers easy-wearing warmth and undeniable Carhartt versatility.

• 10.5-ounce, 50/50 cotton/poly blend or 59/41 cotton/poly blend (Black, Carbon Heather, New Navy)*
• 70/30 cotton/poly blend (Heather Grey)
• Mock neck collar
• 1/4-zipper with storm flap
• Front hand warmer pocket
• Stretchable, spandex-reinforced, rib knit cuffs and waistband
• Carhartt-strong, triple-stitched main seams for added durability
• Carhartt label sewn on left handwarmer pocket
• Loose fit

Select options
Add to wishlist Add to wishlist
New
Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction
Add to wishlist Add to wishlist
Compare
Select options
Quick view

Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction

 $109.95

Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.

Select options
Add to wishlist Add to wishlist

Related Products