$224.89

Storm 6″ Safety Boot

Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole

  Clear selection
Compare
SKU: 226000007899 Category:
Description

Description

The Storm 6″ Safety boot is built for high performance and comfort in extreme cold. The boot is made of premium full-grain leather with TPU reinforcements on the toe and heel along with a thick wool/poly lining inside for added comfort and warmth.  It also features a Composite toe cap, small nail penetration protection, a full nylon shank, and a cold isolation membrane inside the insole along with 200g ThinsulateTM insulation. The full waterproof membrane also ensures that the waterproof feature will never wear off or wash out.

The Storm collection is designed with our Nitrile/PU outsoles to provide added grip in extreme conditions including, cold, heat and chemical exposure. The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. This is an ideal shoe for outdoor work in mild to cold conditions.

 

Additional information

Additional information

Size

10-10.5, 11-11.5, 12, 13, 14, 15, 6-6.5, 7-7.5, 8-8.5, 9-9.5

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products

CSA Surveyor’s Vest

$89.95
Certification

CSA Z96 Class 2

Details

Padding in the neck

Normal fit

Pockets

Chest pocket with telephone pocket and pen pocket, Chest pockets loose hanging with safety strap with push buttons, one with phone pocket and one with pen pockets

Bellowed front pockets, Front pockets with bellows and flap

Reflex

50 mm wide reflective tape

CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest

$22.12
  • 100% polyester mesh for breathability
  • 100% polyester tricot exterior pockets for durability and easy decoration
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
  • Left chest bellows pocket with flap and hook and loop closure
  • Two layered right chest pockets: one open, one divided
  • Two lower front flap pockets with hook and loop closures
  • Interior open lower mesh pockets on both sides
  • Mic clip at left chest for easy access
  • Molded center front zippered closure
  • This garment must be fully zipped to be in compliance with ANSI 107 standards

New Era ® Standard Fit Snapback Trucker Cap

$14.00
This reinvented trucker is on-trend with its structured, high-profile look.
  • 100% cotton twill front panels and bill, 100% polyester mesh mid and back panels
  • Structured
  • High-profile
  • 7-position adjustable snap closure
  • 9FIFTY FIT: Features a classic, throwback look with a flat visor that can curve with a full crown. Includes a structured front panel for stability and an open back with snapback closure.
The purchase of branded and private label products are subject to certain guidelines. For more information about these requirements, see our branded and private label sales policies.

CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest

$26.99
  • 3.4-ounce, 100% polyester mesh
  • Meets ANSI 107 Class 2, Type R visibility standards
  • Triple-stitched main seams
  • Zippered front closure
  • Utility band at right shoulder
  • Left chest pocket with pen stall
  • Two tricot fabric lower-front pockets with secure hook and loop closures
  • Carhartt label sewn on top left pocket
  • Reflective material maintains performance through 50 home launderings
  • This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

Port Authority® Flexfit® Cap

$14.11

The original Flexfit cap. Only Flexfit offers the patented poly-weave spandex to assure you get the perfect fit.

  • 63/34/3 poly/cotton twill/spandex (Colors), 98/2 poly/spandex (Multicam colors)
  • Structured
  • Mid-profile
  • Permacurv® bill to maintain proper shape and curve
  • Stretch fit closure

 

Gildan® – Heavy Blendâ„¢ Hooded Sweatshirt

$7.20
  • 8-ounce, 50/50 cotton/poly
  • Double-needle stitching at waistband and cuffs
  • Double-lined hood with dyed-to-match drawcord
  • 1×1 rib knit cuffs and waistband with spandex
  • Front pouch pocket
  • Safety Green is compliant with ANSI/ISEA 107 high-visibility standards
  • Recycled, high-performing black tear-away label

Please note: This product is transitioning from tear-away labels to recycled, high-performing black tear-away labels. Your order may contain a combination of both labels.