$224.89

Storm 6″ Safety Boot

Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole

  Clear selection
Compare
SKU: 226000007899 Category:
Description

Description

The Storm 6″ Safety boot is built for high performance and comfort in extreme cold. The boot is made of premium full-grain leather with TPU reinforcements on the toe and heel along with a thick wool/poly lining inside for added comfort and warmth.  It also features a Composite toe cap, small nail penetration protection, a full nylon shank, and a cold isolation membrane inside the insole along with 200g ThinsulateTM insulation. The full waterproof membrane also ensures that the waterproof feature will never wear off or wash out.

The Storm collection is designed with our Nitrile/PU outsoles to provide added grip in extreme conditions including, cold, heat and chemical exposure. The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. This is an ideal shoe for outdoor work in mild to cold conditions.

 

Additional information

Additional information

Size

10-10.5, 11-11.5, 12, 13, 14, 15, 6-6.5, 7-7.5, 8-8.5, 9-9.5

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products

Sport-Tek® Dry Zone® Nylon Cap

Price range: $15.25 through $49.90

All the Dry Zone® moisture-wicking performance you love in Sport-Tek® apparel—in caps designed for adults and youth.

  • Fabric: 91/9 nylon/cotton twill
  • Structure: Structured
  • Profile: Mid
  • Closure: Hook and loop

Port & Company® Core Fleece Full-Zip Hooded Sweatshirt

$28.00

A versatile full-zip hooded sweatshirt in our core weight.

  • 7.8-ounce, 50/50 cotton/poly fleece
  • Air jet yarn for softness
  • Two-ply hood
  • Dyed-to-match drawcords
  • YKK metal zipper
  • Front pockets

Looking for a youth companion style for the PC78ZH? See the PC90YZH for the same 7.8-ounce Core Fleece and kid-friendly styling.

CornerStone® ANSI 107 Class 3 Surveyor Mesh Zippered Two-Tone Short Sleeve Vest

$30.00
  • 100% polyester mesh for breathability
  • 100% polyester tricot exterior pockets for durability and easy decoration
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
  • Left chest bellows pocket with flap and hook and loop closure
  • Two layered right chest pockets: one open, one divided
  • Two lower front flap pockets with hook and loop closures
  • Interior open lower mesh pockets on both sides
  • Mic clip at left chest for easy access
  • Molded center front zippered closure
  • This garment must be fully zipped to be in compliance with ANSI 107 standards

DAX Full Brim Hard Hat

$235.92

The DAX Hard Hat is a full brim, fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.

Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction

$109.95

Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.

Hi-Vis Surveyor’s Vest

$89.95
Functionality

Opening in the back for safety harness, Mesh fabric in front yoke and all back

Details

Zipper on the right side for opening pocket at the back

V neck

Padding in the neck

Front closure

Double zippers at the front for adjustable width

Pockets

Back pocket, all back opening with zip in right side

Loose-hanging chest pockets with safety straps and button closure, one with telephone pocket and one with pen pocket

Inside iPad-pocket, Radio loop, Grommets in lower front pockets 2 in each, Lower front pockets with bellow 2 in 1 with flap attached with velcro, Right bottle pocket, adjuster with velcro

Reflex

50 mm wide reflective tape, Reflective tape on shoulders and body