Description
New
$48.99
Portwest Expert Pro Surveyor Vest
Our Expert Pro Surveyors Vest was specially designed for practicality and durability. With contrast tape configuration for increased visibility in diverse types of environment, this vest is robust but yet comfortable due to the Mesh Air back panel and padded neck.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
More Products
Carhartt® Midweight 1/4-Zip Mock Neck Sweatshirt
$49.90From job sites to weekend errands, this layerable 1/4-zip offers easy-wearing warmth and undeniable Carhartt versatility.
• 10.5-ounce, 50/50 cotton/poly blend or 59/41 cotton/poly blend (Black, Carbon Heather, New Navy)*
• 70/30 cotton/poly blend (Heather Grey)
• Mock neck collar
• 1/4-zipper with storm flap
• Front hand warmer pocket
• Stretchable, spandex-reinforced, rib knit cuffs and waistband
• Carhartt-strong, triple-stitched main seams for added durability
• Carhartt label sewn on left handwarmer pocket
• Loose fit
5-Point Tear Away Vest
$32.95
CSA Z96 Class 2
5 tear away with velcro, Opening in the back for safety harness, Meshfabric in front and back
Banded neck, V neck
Shoulder seam with velcro, Side seam with velcro
D-ring
Front closure with velcro
Chest pockets, one with flap and velcro closure and one with pen pockets
Front pockets with flap
Pen pockets
50 mm wide reflective tape, Reflective tape on shoulders and body
New Era® Snapback Low Profile Trucker Cap
$15.00Soft mesh and a low profile give this cap a laid-back attitude.
- 100% cotton (solid); 80/20 acrylic/wool (heather)
- Structured
- Low-profile
- 7-position adjustable snap closure
- 9TWENTY FIT: Features a vintage look with an adjustable closure a contoured crown and precurved visor.
The purchase of branded and private label products are subject to certain guidelines. For more information about these requirements, see our branded and private label sales policies.
DAX Full Brim Hard Hat
$235.92The DAX Hard Hat is a full brim, fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.
CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest
$26.99- 3.4-ounce, 100% polyester mesh
- Meets ANSI 107 Class 2, Type R visibility standards
- Triple-stitched main seams
- Zippered front closure
- Utility band at right shoulder
- Left chest pocket with pen stall
- Two tricot fabric lower-front pockets with secure hook and loop closures
- Carhartt label sewn on top left pocket
- Reflective material maintains performance through 50 home launderings
- This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards
Related Products
-
- This product does not comply with ANSI/ISEA 107-2015
- 2″ silver HiVisTex Pro reflective tape with contrast material
- 100% polyester moisture wicking fabric
- Pocket: 1 Tape free chest pocket ideal for corporate branding
- 2 mic tabs
- 100% polyester mesh for breathability
- 100% polyester tricot exterior pockets for durability and easy decoration
- Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
- Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
- Left chest bellows pocket with flap and hook and loop closure
- Two layered right chest pockets: one open, one divided
- Two lower front flap pockets with hook and loop closures
- Interior open lower mesh pockets on both sides
- Mic clip at left chest for easy access
- Molded center front zippered closure
- This garment must be fully zipped to be in compliance with ANSI 107 standards
5-Point Tear Away Vest
$32.95
CSA Z96 Class 2
5 tear away with velcro, Opening in the back for safety harness, Meshfabric in front and back
Banded neck, V neck
Shoulder seam with velcro, Side seam with velcro
D-ring
Front closure with velcro
Chest pockets, one with flap and velcro closure and one with pen pockets
Front pockets with flap
Pen pockets
50 mm wide reflective tape, Reflective tape on shoulders and body
Hi-Vis Surveyor’s Vest
$89.95Opening in the back for safety harness, Mesh fabric in front yoke and all back
Zipper on the right side for opening pocket at the back
V neck
Padding in the neck
Double zippers at the front for adjustable width
Back pocket, all back opening with zip in right side
Loose-hanging chest pockets with safety straps and button closure, one with telephone pocket and one with pen pocket
Inside iPad-pocket, Radio loop, Grommets in lower front pockets 2 in each, Lower front pockets with bellow 2 in 1 with flap attached with velcro, Right bottle pocket, adjuster with velcro
50 mm wide reflective tape, Reflective tape on shoulders and body
US469 – Hi-Vis Reversible Bodywarmer
$49.99Shell Fabric :
300D Industry: 100% Polyester, 300D Oxford, Stain Resistant Finish, Double PU Coated 190g
Lining Fabric :
65% Polyester, 35% Cotton 260g
Filling Fabric :
100% Polyester 200g
Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction
$109.95Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.
Reviews
There are no reviews yet.