Description
New
$48.99
Portwest Expert Pro Surveyor Vest
Our Expert Pro Surveyors Vest was specially designed for practicality and durability. With contrast tape configuration for increased visibility in diverse types of environment, this vest is robust but yet comfortable due to the Mesh Air back panel and padded neck.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
More Products
CornerStone® ANSI 107 Class 3 Surveyor Mesh Zippered Two-Tone Short Sleeve Vest
$30.00- 100% polyester mesh for breathability
- 100% polyester tricot exterior pockets for durability and easy decoration
- Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
- Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
- Left chest bellows pocket with flap and hook and loop closure
- Two layered right chest pockets: one open, one divided
- Two lower front flap pockets with hook and loop closures
- Interior open lower mesh pockets on both sides
- Mic clip at left chest for easy access
- Molded center front zippered closure
- This garment must be fully zipped to be in compliance with ANSI 107 standards
Storm 6″ Freelock Boot
$246.31Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole
– Freelock quick lace system
Port & Company® Core Fleece Full-Zip Hooded Sweatshirt
$28.00A versatile full-zip hooded sweatshirt in our core weight.
- 7.8-ounce, 50/50 cotton/poly fleece
- Air jet yarn for softness
- Two-ply hood
- Dyed-to-match drawcords
- YKK metal zipper
- Front pockets
Looking for a youth companion style for the PC78ZH? See the PC90YZH for the same 7.8-ounce Core Fleece and kid-friendly styling.
CornerStone® Enhanced Visibility Fleece Pullover Hoodie
$42.20Enhanced visibility joins moisture-wicking performance in this layerable worksite basic.
- 5.5-ounce, 100% polyester smooth-faced fleece
- Moisture-wicking
- Black bottom front and lower sleeves for a cleaner appearance
- Three-panel hood with drawcord adjustable closure
- Taped neck
- Front pouch pocket
- Rib knit cuffs and hem
- Non-ANSI
Gildan® Softstyle® Crewneck Sweatshirt
$5.38- 8.4-ounce, 80/20 ring spun cotton/poly
- 75/25 ring spun cotton/poly (Sport Grey)
- 50/50 ring spun cotton/poly (Dark Heather)
- Two-end ring spun cotton face fabric
- 1×1 rib knit with spandex cuffs and bottom band
- Dropped shoulder
- Double-needle topstitching throughout
- Tubular body
- Classic fit
- Recycled, high-performing black tear-away label
Please note: This product is transitioning from tear-away labels to recycled, high-performing black tear-away labels. Your order may contain a combination of both labels.
Port Authority® Interlock Knit Mock Turtleneck
$8.49Our mock is crafted from combed ring spun cotton for a soft hand feel.
- 6.3-ounce, 100% combed ring spun cotton
- 1×1 rib knit collar and cuffs
- Double-needle collar and hem
Related Products
- 3.4-ounce, 100% polyester mesh
- Meets ANSI 107 Class 2, Type R visibility standards
- Triple-stitched main seams
- Zippered front closure
- Utility band at right shoulder
- Left chest pocket with pen stall
- Two tricot fabric lower-front pockets with secure hook and loop closures
- Carhartt label sewn on top left pocket
- Reflective material maintains performance through 50 home launderings
- This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards
- Radio loop for easy clipping of a radio
- Front zip opening for easy access
- Phone and pen holder pocket
- This product does not comply with ANSI/ISEA 107-2015
Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction
$109.95Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.
CSA Surveyor’s Vest
$89.95CSA Z96 Class 2
Padding in the neck
Normal fit
Chest pocket with telephone pocket and pen pocket, Chest pockets loose hanging with safety strap with push buttons, one with phone pocket and one with pen pockets
Bellowed front pockets, Front pockets with bellows and flap
50 mm wide reflective tape
Hi-Vis Surveyor’s Vest
$89.95Opening in the back for safety harness, Mesh fabric in front yoke and all back
Zipper on the right side for opening pocket at the back
V neck
Padding in the neck
Double zippers at the front for adjustable width
Back pocket, all back opening with zip in right side
Loose-hanging chest pockets with safety straps and button closure, one with telephone pocket and one with pen pocket
Inside iPad-pocket, Radio loop, Grommets in lower front pockets 2 in each, Lower front pockets with bellow 2 in 1 with flap attached with velcro, Right bottle pocket, adjuster with velcro
50 mm wide reflective tape, Reflective tape on shoulders and body
CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest
$26.99
Portwest US392 Women’s Hi Vis Safety Work Vest with Reflective Tape Yellow
$19.99
Blaklader Yellow/Black Hivis Vest for Carpentry Construction
$32.95The long awaited Blaklader Hi-Vis mesh vest is here at last. Built like the rest of our garments the quality is unrivaled in the vest arena. The contrast with black fabric allows you to work at your best while keeping the garment clean and visible as long as possible. Now you have a Blaklader option for the warmer days when our jackets are just too much. ANSI/ISEA 107-2015 Type R class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.
Reviews
There are no reviews yet.