$152.87

Elite Safety Shoe – Vented

Features:
– ASTM F2413-18 Puncture Resistant
– Composite toe cap
– Electrical Hazard Protection
– Slip Resistant Outsole
– Waterproof membrane
– Freelock quick lace system
– Injection molded mid-sole

  Clear selection
Compare
SKU: 225500007899-1 Category:
Description

Description

The Elite Safety Shoe is a high-performance safety shoe built for maximum durability and function. This shoe is made of premium full-grain leather with microfiber and TPU reinforcements to protect and support the foot in the best way.  It also features a Composite toe cap, soft nail penetration protection, and Freelock quick lace system. Reflective details on the side as well as the heel offer a bit of added flash to keep you visible when needed.

The insole, with anatomical support, is made of a smooth PU material covered with a textile surface with good moisture absorption. This is an ideal shoe for craftsmen in construction, plumbers, electricians, and maintenance.

 

Additional information

Additional information

Size

10-10.5, 11-11.5, 12, 13, 14, 15, 6-6.5, 7-7.5, 8-8.5, 9-9.5

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products

Hi-Vis Surveyor’s Vest

$89.95
Functionality

Opening in the back for safety harness, Mesh fabric in front yoke and all back

Details

Zipper on the right side for opening pocket at the back

V neck

Padding in the neck

Front closure

Double zippers at the front for adjustable width

Pockets

Back pocket, all back opening with zip in right side

Loose-hanging chest pockets with safety straps and button closure, one with telephone pocket and one with pen pocket

Inside iPad-pocket, Radio loop, Grommets in lower front pockets 2 in each, Lower front pockets with bellow 2 in 1 with flap attached with velcro, Right bottle pocket, adjuster with velcro

Reflex

50 mm wide reflective tape, Reflective tape on shoulders and body

Sport-Tek® Flexfit® Cool & Dry Poly Block Mesh Cap

$14.11

High-performance Flexfit Cool & Dry technology combines with extra-pliable Poly Block Mesh for a softer, more comfortable cap that wicks moisture, dries quickly and circulates air for coolness.

  • Fabric: 100% polyester
  • Structure: Structured
  • Profile: Mid

CornerStone® ANSI 107 Class 3 Soft Shell Jacket

$72.98
This warm performance soft shell combines superior weather protection with the highest class of visibility.
  • 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining
  • Black bottom front and lower sleeves for a cleaner appearance
  • Fabric waterproof rating: 5000MM
  • Fabric breathability rating: 5000G/M²
  • Full-length interior storm flap with chin guard
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
  • Molded right chest, hand and center front zippers with rubber pulls
  • Mic clips at shoulders
  • Elastic cuffs with adjustable hook and loop closures and rubber tabs
  • Adjustable drawcord hem
  • This garment must be fully zipped to be in compliance with ANSI 107 standards

CornerStone® ANSI 107 Class 3 Surveyor Mesh Zippered Two-Tone Short Sleeve Vest

$30.00
  • 100% polyester mesh for breathability
  • 100% polyester tricot exterior pockets for durability and easy decoration
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
  • Two-tone contrast polyester tricot fabric under reflective tape; contrast binding
  • Left chest bellows pocket with flap and hook and loop closure
  • Two layered right chest pockets: one open, one divided
  • Two lower front flap pockets with hook and loop closures
  • Interior open lower mesh pockets on both sides
  • Mic clip at left chest for easy access
  • Molded center front zippered closure
  • This garment must be fully zipped to be in compliance with ANSI 107 standards

CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest

$26.99
  • 3.4-ounce, 100% polyester mesh
  • Meets ANSI 107 Class 2, Type R visibility standards
  • Triple-stitched main seams
  • Zippered front closure
  • Utility band at right shoulder
  • Left chest pocket with pen stall
  • Two tricot fabric lower-front pockets with secure hook and loop closures
  • Carhartt label sewn on top left pocket
  • Reflective material maintains performance through 50 home launderings
  • This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

Port & Company® Long Sleeve Core Cotton Tee

$7.20

A no-frills t-shirt in our classic silhouette-with a very friendly price.

  • 5.4-ounce, 100% cotton
  • 98/2 cotton/poly (Ash)
  • 90/10 cotton/poly (Athletic Heather)
  • 50/50 cotton/poly (Dark Heather Grey, Heather Navy, S. Green, S. Orange)
  • Removable tag for comfort and relabeling