Description
This affordable, breathable mesh vest meets ANSI 107 Class 2 requirements and has a pocket for jobsite necessities.
New
$15.99
CornerStone® ANSI 107 Class 2 Economy Mesh One-Pocket Vest
- 100% polyester mesh for breathability
- Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body
- Contrast black binding
- Left chest pocket for essentials
- Mic clip at left chest for easy access
- Front hook and loop closure for easy on/off
- This garment must be fully closed to be in compliance with ANSI 107 standards
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
More Products
Gildan® Ultra Cotton® 100% US Cotton Long Sleeve T-Shirt
$7.205.4-ounce, 50/50 cotton/poly jersey
47/53 cotton/poly (Oxford)
Moisture-wicking
Tear-away label
Double-needle coverstitching on front neck
Seamless 1×1 rib knit collar
Shoulder-to-shoulder taping
Rib knit cuffs
Double-needle hem
Ash (formerly Birch)
DAX Full Brim Hard Hat
$235.92The DAX Hard Hat is a full brim, fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.
Port Authority® Women’s Core Classic Pique Polo
$7.20An indispensable polo for just about every uniforming need. Designed for everyday wear, this pique polo is made from a durable blend for lived-in comfort, traditional good looks and exceptional value.
- 4.4-ounce, 60/40 cotton/poly pique
- Flat knit collar and cuffs
- 4-button placket with dyed-to-match buttons
- Side vents
DryBlend® 50 Cotton/50 Poly T-Shirt
$7.20- 5.5-ounce, 50 US cotton/50 poly
- 65 US cotton/35 poly (Heather Sport colors)
- DryBlend moisture-wicking properties
- Non-topstitched, classic width, rib collar
- Taped neck and shoulders
- Classic fit, seamless body
- Recycled, high-performing black tear-away label
Please note: This product is transitioning from tear-away labels to recycled, high-performing black tear-away labels. Your order may contain a combination of both labels.
Storm 6″ Safety Boot
$224.89Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole
Carhartt Force ® Helmet-Liner Mask
$61.18Be warm in the bitter cold. Wicks sweat, takes the fight to odor and wins in a technical knockout.
- 92/8 poly/spandex blend with fleeced interior for comfort and warmth
- Carhartt Force® fabric fights odors; FastDry® technology wicks away sweat for comfort
- Full facial protection that extends below the neckline
- Face mask pulls down below the chin when not needed
- Flat seam construction enhances comfort
- Carhartt label printed on front
- Carhartt Force® logo printed on back
Related Products
- 3.4-ounce, 100% polyester mesh
- Meets ANSI 107 Class 2, Type R visibility standards
- Triple-stitched main seams
- Zippered front closure
- Utility band at right shoulder
- Left chest pocket with pen stall
- Two tricot fabric lower-front pockets with secure hook and loop closures
- Carhartt label sewn on top left pocket
- Reflective material maintains performance through 50 home launderings
- This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards
Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction
$109.95Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.
5-Point Tear Away Vest
$32.95
CSA Z96 Class 2
5 tear away with velcro, Opening in the back for safety harness, Meshfabric in front and back
Banded neck, V neck
Shoulder seam with velcro, Side seam with velcro
D-ring
Front closure with velcro
Chest pockets, one with flap and velcro closure and one with pen pockets
Front pockets with flap
Pen pockets
50 mm wide reflective tape, Reflective tape on shoulders and body
US469 – Hi-Vis Reversible Bodywarmer
$49.99Shell Fabric :
300D Industry: 100% Polyester, 300D Oxford, Stain Resistant Finish, Double PU Coated 190g
Lining Fabric :
65% Polyester, 35% Cotton 260g
Filling Fabric :
100% Polyester 200g
CSA Surveyor’s Vest
$89.95CSA Z96 Class 2
Padding in the neck
Normal fit
Chest pocket with telephone pocket and pen pocket, Chest pockets loose hanging with safety strap with push buttons, one with phone pocket and one with pen pockets
Bellowed front pockets, Front pockets with bellows and flap
50 mm wide reflective tape
CornerStone® ANSI 107 Class 2 Mesh Back Safety Vest
$26.99
Portwest Expert Pro Surveyor Vest
$48.99Our Expert Pro Surveyors Vest was specially designed for practicality and durability. With contrast tape configuration for increased visibility in diverse types of environment, this vest is robust but yet comfortable due to the Mesh Air back panel and padded neck.
Reviews
There are no reviews yet.