$61.18

Carhartt Force ® Helmet-Liner Mask

Be warm in the bitter cold. Wicks sweat, takes the fight to odor and wins in a technical knockout.

  • 92/8 poly/spandex blend with fleeced interior for comfort and warmth
  • Carhartt Force® fabric fights odors; FastDry® technology wicks away sweat for comfort
  • Full facial protection that extends below the neckline
  • Face mask pulls down below the chin when not needed
  • Flat seam construction enhances comfort
  • Carhartt label printed on front
  • Carhartt Force® logo printed on back
  Clear selection
Compare
SKU: CTA267 Category:
Additional information

Additional information

Color

Black, White, Royal, Navy, Safety Green, Safety Orage, Acuatic Blue

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

More Products

Storm 6″ Safety Boot

$224.89

Features:
– ASTM F2413-18 Puncture Protection
– Composite toe cap
– Electrical hazard protection
– Slip-resistant outsole
– Nitrile/PU Extreme grip outsole
– 200g ThinsulateTM
– A wide, comfortable fit
– Waterproof membrane
– Cold isolation membrane
– Injection molded mid-sole

Jerzees® – Dri-Power® 50/50 Cotton/Poly Long Sleeve T-Shirt

$7.20

5.4-ounce, 50/50 cotton/poly jersey
47/53 cotton/poly (Oxford)
Moisture-wicking
Tear-away label
Double-needle coverstitching on front neck
Seamless 1×1 rib knit collar
Shoulder-to-shoulder taping
Rib knit cuffs
Double-needle hem
Ash (formerly Birch)

Blaklader Yellow Hi-Vis Utility Vest for Carpentry Construction

$109.95

Two Chest pockets that unsnap on bottom allowing for a swing, with safety straps. Four reinforced utility pockets at waist. Safety harness access point through back. Built in 3-inch extension with zipper. Hammer loop. ANSI Class 2. S-3XL It’s not your average hi-vis vest. Made from a durable poly-cotton blend, it includes swinging chest pockets with safety straps, four reinforced utility pockets at waist, safety harness access point through back, a 3-inch extension with zipper and 3M reflective tape. ANSI Class 2. These vests are made in a European fit and designed to fit snug for safety reasons. Please reference the sizing chart in images and size up if you want a looser fit.

Jerzees® – Youth NuBlend® Pullover Hooded Sweatshirt

$24.00
  • 8-ounce, 50/50 cotton/poly NuBlend® pill-resistant fleece
  • High stitch density for a smooth printing surface
  • Two-ply hood
  • No drawcord at hood
  • 1×1 rib knit in cuffs and waistband
  • Front pouch pocket
  • Double-needle coverseamed neck, armholes and waistband
  • Ash (formerly Birch)
  • No drawcord at hood

CornerStone® ANSI 107 Class 2 Segmented Tape Tee

$24.00

This breathable, moisture-wicking mesh tee delivers high visibility and comfort in Class 2 environments.

  • 4.1-ounce, 100% polyester birdseye mesh
  • 1×1 rib knit neck
  • Back neck tape
  • Segmented, durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and easy movement
  • Left chest pocket

CornerStone® ANSI 107 Class 3 Soft Shell Jacket

$72.98
This warm performance soft shell combines superior weather protection with the highest class of visibility.
  • 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining
  • Black bottom front and lower sleeves for a cleaner appearance
  • Fabric waterproof rating: 5000MM
  • Fabric breathability rating: 5000G/M²
  • Full-length interior storm flap with chin guard
  • Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
  • Molded right chest, hand and center front zippers with rubber pulls
  • Mic clips at shoulders
  • Elastic cuffs with adjustable hook and loop closures and rubber tabs
  • Adjustable drawcord hem
  • This garment must be fully zipped to be in compliance with ANSI 107 standards